焊接烟雾安全-你需要知道的一切
By Engaged Expert
Parmjit GahirParmjit或Parm对他的朋友(Element的职业卫生主管)是一名职业卫生学家,拥有近30年的国内和国际运营经验,在不同的im体育平台app下载部门获得了经验.
Welding fume safety legislation
英国立法规定,所有工人都必须受到保护,免受有害空气物质的危害. 《im体育APP》(COSHH)为雇主提供安全的工作环境制定了明确的规则,包括焊接烟雾安全.
What are welding fumes?
Fumes and particles produced by welding activities; a complex mix of airborne gases including Nitrous Oxide, Ozone, metals, and fine particles.
The dangers of welding fumes
焊接烟雾是非常危险的,被列为一种已知的致癌物质. 接触这种物质的工人有患职业性哮喘的风险, cancer, irritation of the breathing airways, metal fume fever, and pneumonia, amongst others.
Welding fume risk assessment
任何风险评估的一个关键部分是识别和准确评估暴露的风险水平. This is based on:
-
The toxicity of the substances
-
The concentrations involved
-
The duration of exposure
Welding fume exposure monitoring
焊接烟尘没有单一的工作场所暴露限值(WEL). HSE文件EH40定义了焊接烟尘中常见的各种金属氧化物化合物和气体的wel:
Substance |
WEL |
Aluminium |
10 mg/m3 |
Chromium |
0.5 mg/m3 |
Iron |
5 mg/m3 10 mg/m3 STEL |
Manganese - Inhalable Fraction - Respirable Fraction |
0.05 mg/m3 |
Titanium |
10 mg/m3 |
Nitrogen Oxide |
2.5 mg/m3 |
Nitrogen Dioxide |
0.955 mg/m3 |
Copper | 0.2 mg/m3 |
Nickel |
0.1 mg/m3 |
Ozone | 0.4 mg/m3 STEL |
Chromium VI (process generated) |
0.025 mg/m3 |
这些数值是基于平均8小时的暴露时间加权平均值. In the case of workers carrying out welding, 有可能他们短期暴露于中等高浓度,但当平均超过8小时轮班时,暴露量很低.
有些物质有短期暴露限值(STEL),浓度在15分钟内不得超过限值.
Welding fume safety
法律限制在WELs和STELs中有明确规定,不应超过 , 由于所有的焊接烟尘被归类为致癌物,暴露量应尽可能减少到合理可行的低水平(ALARP)。.
COSHH风险评估应确定任何工作场所暴露监测的频率和程序.
一般来说,在相同暴露组(SEG)内应采集6个样本。.
应定期进行监测,监测频率应以风险评估为基础,并考虑:
- 焊接工艺(TIG, MIG, MMA等.)
- Frequency and duration of activity
- Historical years exposure monitoring data
- 工程控制的到位和措施的有效性
重要的是要注意,在某一天进行暴露监测时,操作条件和工作量应代表典型的活动. 例如,年度监测应尽可能是该年的典型情况. 如果进行了重大改变或修改,则应尽快进行暴露监测,以评估这些变化.
焊接排烟器等控制措施
由于焊接烟雾的严重性和危害性, 所有室内焊接活动都需要工程控制,通常以局部排气通风(LEV)的形式进行。.
单独的LEV系统往往不能充分控制暴露,因此使用适当的呼吸防护设备(RPE)来进一步保护工人.
Outdoor welding also requires adequate RPE. 对工人进行正确使用防护用品和个人防护用品的培训至关重要. We are able to offer Face Fit Testing for regulatory compliance.
- 采用工程措施控制焊接烟雾.g. LEV
- 还应采用足够的RPE,以进一步防止残余烟雾
- lev应按照HSG 258的要求,每14个月进行一次彻底的检查和测试,正确操作和维护
- RPE应得到充分维护,并提供正确使用的培训
Contact Element for expert advice
Contact Element 今天与我们友好的专家讨论焊接烟雾暴露监测.
我们的职业卫生团队拥有丰富的经验,我们可以为您提供一系列服务,包括:
Find related Resources
Related Pages
Welding Fume Monitoring
我们的职业卫生师团队可以进行全面的监测和评估服务, 包括承担焊接烟尘暴露烟气和气体的监测.
Occupational Hygiene Services
监察及评估工作地点的空气质素, noise level, electromagnetic fields, vibration levels, 水质可以帮助你保护你的员工免受永久性的健康损害.
Workplace Air Monitoring
Element经验丰富的合格职业卫生学家团队专门提供一系列工作场所空气监测服务,以供在各种操作环境中使用.
Noise in the Workplace
Element的专家在进行现场噪音评估方面有多年的经验. 我们的专家进行的所有评估都通过了声学研究所和BOHS的认证, 符合英国HSE指南L108“控制工作噪音”."